The "PNP" version of the aircraft requires only a receiver and battery to fly. It does not however include any FPV or autopilot equipment.
Based on the great reputation of the Dart Wing family and the invaluable info gathered from top world-wide FPV pilots, ZOHD was able to develop the Dart 250G. Using the default configuration and the recommended FPV gear, it is 100% under 250 grams. Now you can enjoy more than 30 minutes of FPV action (with a 18650 2S1P 3500mAh) or a thrilling proximity mission (on 3S setup). A small wingspan of 570mm makes it super portable!
AUW is less than 250 grams which makes it ideal to comply with regulations.
Durable EPP material, built-in CF spar for enhancement, crash resistant
Glue-free assembly, the main wing and tails come with pre-applied 3M adhesive, just peel it off and install them
Large battery bay for extended flight time
Nose camera bay compatible with all FPV and AIO cameras in the market
Teflon cover for the fuselage bottom, super durable, protecting the fuselage bottom from scratches
Servo arms are well protected by an EPP hump
Built-in CF rod in the ailerons will give precision and sharp action to your inputs
Dedicated equipment bay for Flight Controller and GPS
Main wing leading edge cover for those unexpected impacts
Textured areas on both side of the fuselage, for more secure hand launch grip
Optimized air-cooling design will keep your gear safe from overheating
ESC Connector: XT30 with JST accessory plug.
Dart 250G with servos, motor, and ESC installed.
Material: High-Quality EPP
Wingspan: 570mm (22.44'')
Length: 379mm (14.92in'')
Motor: 1406 size, 2600KV
ESC: 30A w/5V 2A BEC
Propeller: 2 blade 5x5 (included)
Recommended Batteries: Lipo 2S 900-1500mAh (*), Li-Ion 18650 2S1P 3500mAh (*)
Propeller: 3 blade 3x5x3 (included)
Recommended Battery: Lipo 3S 800-1500mAh (*)
(*) Batteries are not included.