Orders shipped Monday-Friday from Arcadia, California.

Tempest Brushless ESC, 60A 2-6S

Your Price: $37.99
In Stock.
Part Number:TEM-ESC-60A-6S

Choose Options

Tempest Brushless ESC Programming Card (+$9.99)
Tempest Speed Controllers are designed to work in perfect harmony with Tempest Brushless motors, providing reliable operation with a smooth linear throttle response.   These speed controllers will also work extremely well with virtually every other brand of brushless motor.  These new ESC’s feature an STM 32-Bit Micro-Controller Unit (MCU), an integrated 3-phase gate driver and high-quality MOSFET Power Transistors.

Note from the Team-Legit Tech Bench: These ESCs will do an excellent job of driving the new generation of high-kv brushless outrunner motors.  However, in order to do so smoothly, the Motor Type setting must be set to EDF (default is NORMAL).  Failure to do this can lead to desyncing of the ESC and motor at high-throttle.  Once this adjustment is made, the 32-bit Tempest ESCs provide awesome performance at very reasonable cost.  Combined with juicy integrated switching BECs, the Tempest line is Team-Legit's new go-to line of ESCs.  Lower-kv motors do not need this adjustment.

All Tempest Speed Controllers come with built-in BEC circuits to provide power to the radio receiver and servos in your model.  The smallest 6-Amp model has a Linear BEC providing 5.0 volts at up to 1.5 amps.  The rest of the Tempest Speed Controllers, from the 15-Amp 4-Cell up through the 120-Amp 8-Cell model, all have Switching BEC Circuits providing 5.5 volts, with outputs ranging from 2 amps to 8 amps, depending on the model.

Tempest Speed Controller Features
-32-Bit ARM MCU offers small size, light weight and high-speed operation
-High-resolution signal input offers smooth and linear throttle response
-Throttle signal loss protection prevents fly-aways by reducing throttle
-Auto-Calibration of throttle endpoints gives full range of throttle operation
-High level of compatibility that works with most brands of brushless motors
-Integrated BEC circuits provide reliable power to radio receiver and servos
-Adjustable Over-Temperature protection reduces motor power if ESC gets too hot
-Locked-Rotor Protection shuts down the ESC if the prop is blocked while throttle is applied
-Synchronous Rectification and Regenerative Braking offer high efficiency operation
-Wide range of adjustable parameters, 14 in total, to suit many different types of motors
-Easy ESC programming is available with Full-Featured Programming Card

Speed Controller Details
-Several different models available from 6-Amp 2-Cell to 120-Amp 8-Cell
-PWM Frequency adjustable from 8 KHz up to 32 KHz to match motor
-Wide throttle range compatibility from 900uS to 2400uS if needed
-High-Speed operation with Max Speed of 300,000 RPM on 2-pole motors, 100,000 RPM on 6-pole motors and 43,000 RPM on 14-pole motors
-Low Voltage Cutoff available to prevent over-discharge of batteries
-Auto Cell Count detection available or set to a fixed number of cells
-Inactivity Alarm warns you if you forget to unplug the battery after flight

Available ESC Parameters
factory default setting shown in bold text.

LVC Cut-Off Mode:  Off, Slow Down, Shut Off
Battery Type:  LiPo-HV, LiPo, NiMH or NiCad
Cut-Off Voltage per Cell:  2.9, 3.0, 3.1, 3.2, 3.3, 3.4, 3.5
Number of Cells:  2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, Auto Detect
ESC Temp Protection Level:  90°C, 100°C, 110°C, 120°C, 130°C, 140°C
Motor Timing:  0°, 6°, 12°, 18°, 24°, 30°, Auto Set
Brake Strength:  Off, 25%, 50%, 75%, 100%
Motor Rotation Direction:  Normal, Reversed
Motor Start-up Power:  10%, 20%, 25%, 30%, 35%, 40%, 45%
Auto-Rotation Restart:  Off, 10-Sec., 15-Sec., 20-Sec., 30-Sec., 40-Sec., 60-Sec.
Motor Type:  Normal, Disc Type, EDF
SBEC Output Voltage:  Fixed at 5.0 or 5.5 Volts, depending on model
Motor Spool-up Acceleration:  L1, L2, L3, L4, L5, L6, L7
ESC PWM Frequency:  8 KHz, 12 KHz, 16 KHz, 24 KHz, 32 KHz
Inactivity Beacon Delay:  1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 10 Min

ESC Model: 60A-6S
Continuous  Current / Burst Rating (10 Sec): 60A / 80A
Voltage Range: 7.4 - 22.2v
LiPo Cell Range: 2-6
Ni-XX Cell Range: 6-18
BEC Type: Switching
BEC Output: 5.5V @ 5A
Weight Grams / Ounces: 59.6g / 2.10oz
Dimensions mm (L x W x H): 65mm x 32mm x 18mm
Dimensions Inches (L x W x H): 2.56" x 1.26" x 0.71"
Battery Lead Gauge: 14 AWG
Bat. Lead Length mm / inches: 110mm / 4.33"
Motor Lead Gauge: 14 AWG
Motor Lead Length mm / inches: 110mm / 4.33"
Servo Lead Length mm / inches: 315mm / 12.40"


3.5mm Bullet Connectors, 3 pairs
In Stock.
4mm Bullet Connectors, 3 pairs
In Stock.
XT60U Connector - Male
In Stock.
Tempest Brushless ESC Programming Card
In Stock.

Recently Viewed Items