Team Legit 5D2 Wing Kit

The 5D2 is a comprehensive re-imagining of the classic Legit Wing formula.  Familiar on the outside, yet re-thought in structure and function.  More performance, more durability, easier to build and easier to operate.  The 5D2 is the first of our next-generation of FPV wing kits.

We are currently producing a new instructional build video series for the 5D2 and future Legit Wings.  It will be posted here upon release, as well as on our YouTube page.

Payload-swapping nose system

Structural forward bulkhead

Claw-style motor mount

Pre-chamfered foam trailing edge

Pre-routed foam passages for inboard motor wiring

Advanced carbon control linkages

Servo access trays 

Vertical-stand winglet feet

Wingspan: 1270mm (50")

Typical flying weight: 2100g (74oz)

Center of gravity target: 128mm forward of the wing’s squared central trailing edge.  Alternatively, 260mm ahead of the wingtip, measured diagonally along the leading edge.

Motor mount compatibilities:

Designed for outrunner bell-mounted prop adapters only.  Not designed for reversed, shaft-mounted prop adapters.

Recommended stator lengths: 14-26mm

4S 3000-6000mah LiPo, 4S 5000mah recommended

6S 2000-4000mah LiPo, 6S 3300mah recommended

Lithium Ion 18650: 6-16 total cells

Lithium Ion 21700: 4-12 total cells

Foam cores with bottom-side wing beds

Pre-shaped Balsa elevons

Fiberglass spars

Laminate

Control hardware

Coroplast parts: Main bay floor and top hatch, Winglets, Front skids, Stock for auxiliary bay lids

Printed parts: Forward bulkhead, Motor mount, Motor adapter, Motor guard, Servo trays, Winglet feet

All required screws and fasteners

Hook-and-loop material

Servo lead extensions

Glue: Amazing GOOP Contact Adhesive (available above)

Spray Adhesive: 3M 90 recommended

Paint: Rust-Oleum 2X Ultra Cover recommended

Sealing / covering iron

Metric hex drivers, 1.5mm and 2mm

A sharp snap blade!

All printed noses are made of durable, yet flexible TPU.  This material absorbs impacts and is nearly indestructible.  Additional noses may be purchased as accessories.

This nose fits a Hero9, Hero10 or Hero11 action camera.  It also fits one board-style FPV camera.

 

These noses do not carry a large-footprint action camera.  The Single FPV nose carries one board-style FPV camera centrally.  This is also the nose recommended for line-of-sight flying.  The Twin FPV nose carries a pair of board-style FPV cameras.  A popular use case for Twin FPV is carrying one camera optimized for day-light flying and another camera optimized for low-light night flying.  Both the Single FPV and Twin FPV noses feature convenient slots for holding common steel weights as ballast if needed.  The rear faces of the noses have guide channels for wiring. 

All FPV noses include socket carriages for mounting board-style FPV cameras.  The carriages fit a wide range of camera shapes and feature depth adjustment.  Cap plugs are also included for when cameras are not in use.

 

 

The Do-It-Yourself Foam Nose gives the option for builders to affix a camera (or not!) in the traditional way they would for an EPP flying wing.  Virtually any format camera can be mounted by deft use of knife and glue.  The included printed base allows the foam nose to be bolted to the airframe's bulkhead, in the same manner as the other noses.  Wire guide channels are provided on the backside of the base.

 

...or just have a blast flying from your couch!  Team Legit's 5D2 is included in the April 2023 (v1.15) release of the Wings computer simulator.   Relax in free flight, practice shooting gates solo or try competitive online multiplayer racing!