Center of Gravity: 5" (127mm) back from the original nose point
Included in kit:
Molded-EPP foam wing cores with CNC-routed spar channels
Fiberglass spars
Balsa stock for elevons
Kydex bay floor and Coroplast bay lid
Coroplast winglets
2x Kydex/3D-printed motor mounts (16 x 19mm M3 mounting and 12 x 16mm M2 mounting)
Required to complete build:
Control hardware
Laminate (Optional)
Note: a lightweight 1.7 mil laminate works great for those wishing to skin their Little Bastard. Laminating is cosmetic and not required. Available Here.All electronics
Recommended Electronics:
Motor: Any motor suitable for a high-powered 3" quadcopter or typical 4-5" quadcopter
15-30 Amp ESC capable of high RPM Note: typically 32-bit is required for high RPM operation. Miniquad ESCs can work but require external BECs.
