Orders shipped Monday-Friday from Arcadia, California.
Home > Motors > 22-27mm  >  Cobra C-2217/16 Brushless Motor, Kv=1180

Cobra C-2217/16 Brushless Motor, Kv=1180

 | Questions about this item? Be the first to ask here.
Your Price: $30.99
In Stock.
Part Number:CM-2217/16
Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

The Cobra 2217 series motors have a 0.125 inch (3.17mm) shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

To complete the package, a complete hardware accessory kit is included with every Cobra Motor. Included in this hardware kit are the following items:

- Heavy Duty 3mm Thick Cross Style Motor Mount
- Four M3x6mm Motor Mount Screws
- Bolt-On style threaded prop adapter with 3 screws
- Retaining Collar with Set Screw
- Three female 3.5mm bullet connectors
- Three pieces of heat-shrink tubing


Click here for Cobra C-2217/16 Propeller Data Chart


Cobra C-2217/16 Motor Specifications
 Stator Diameter 22.0 mm (0.866 in)
 Stator Thickness 17 mm (0.669 in)
 Number of Stator Slots 12
 Number of Magnet Poles 14
 Motor Wind 16 Turn Delta
 Motor Kv Value 1180 RPM per Volt
 No Load Current (Io) 0.75 Amps @ 8 Volts
 Motor Resistance (Rm) per Phase 0.105 Ohms
 Motor Resistance (Rm) Phase to Phase 0.070 Ohms
 Maximum Continuous Current 24 Amps
 Max Continuous Power (3-cell Li-Po) 265 Watts
 Motor Weight 73.0 grams (2.57 oz.)
 Outside Diameter 27.7 mm (1.091 in.)
 Shaft Diameter 3.17 mm (0.125 in.)
 Motor Body Length 33.0 mm (1.299 in.)
 Overall Shaft Length 47.0 mm (1.850 in.)
 Motor Timing 5-10 degrees
 PWM Frequency 8kHz

Recently Viewed Items

Browse Similar Items