Orders shipped Monday-Friday from Arcadia, California.

Ritewing Nano Drak

Your Price: $134.99
In Stock.
Part Number:RW-ND

Choose Options

Wing Type
28" Short wings
40" Long Wings (+$15.00)
Deluxe combo, 28" & 40" wing sets (+$45.00)
4S Motor: Cobra 2210 FPV Race Wing Motor (2200kv) (+$27.99)
ESC: Tempest Brushless ESC, 40A 2-6S (+$29.99)
Tempest Brushless ESC Programming Card (+$9.99)
Servos: 2x EMAX ES09MD II (+$25.00)
Propellers: 2x APC 5.5x4.5E (+$4.86)
Advanced Carbon Control Rod Kit (Small) by Team Legit (+$17.99)
Airframe Modification Add-Ons
Boom Kit for Nano Drak (+$39.99)
45" Plank Wing & Fin Set for Ritewing's Nano Drak (+$99.99)
Build Supplies
Laminate: 4 yards of 3-mil (+$15.96)
Adhesive: Amazing GOOP (2 fl oz) (+$6.49)

The third member of the Drak family has arrived...the Nano Drak by Chris Klick!

The Nano Drak is the same concept as the rest of the Drak family, but with even more flexibility and fun in a Nano sized package.  All the same features and customizations exist as with the Mini and the full sized Drak.

The Nano Drak is a full system with two different wings styles and an optional tail boom that all change and or enhance the capability of the airframe and how it flies. The Dark Nano is smaller, but it flies like a much larger aircraft.  This airframe will provide the speed needed for short fun missions or with the addition of larger wings it will easily see the far horizon.

This is truly a small package with big potential!

28" Short wings:
40" Long wings:
Deluxe kit includes both wing sets:

Kit Includes:
Molded EPP foam wing cores and fuselage
Coroplast/plastic fins and bays
Balsa stock for control surfaces
Thick carbon tube main spars
Thin fiberglass surface spars
Aluminum motor mount

Recommended Electroincs
Servos: EMAX ES09MD II Digital Metal-Geared Micro Servo (available here)
Motor: Cobra 2210 Champion Series Motor, Kv=2200 (available here)
   alternate: SunnySky X2212 V3 Brushless Motor, 2450kv (available here)
Speed Controller: Tempest Brushless ESC, 40A 2-6S (available here)
Propeller: 5-6" diameter
Battery: 3S 3300mAh or 4S 2600mAh

Build notes:
Recommended 28" wings CG: 15mm forward of the front main spar cap
Recommended 40" wings CG: 7mm forward of the front main spar cap
Typical flying weight: ~800g with 4S 2,200mAh LiPo battery

Required to complete build:
Control hardware (available here)
All electronics

Optional to complete build:
Lamination film (available here)
Sealing/Laminating Iron (available here)

Recommended building supplies:
Amazing Goop glue (available here)
Plasti Dip® paint (regular spray paint will chip on this molded EPP foam)
Rotary power tool (such as Dremel) with routing guide attachment
A sharp snap-blade!

Optional parts:

Recently Viewed Items