This is a kit to build two extended wings for Ritewing's Full-size Drak aircraft. You will combine your original fuselage with these longer replacement wings to create an 80" span Drak.
Building these wings is similar to building a wire-cut EPP wing. The wing cores come with spar lines marked and spar tube holes already drilled. They are by no means difficult builds...the wings build up rather quickly relative to full aircraft. However, some experience with building wire-cut EPP wings is recommended. Our team can build a set of wings for you if you'd like.
Included in the basic kit:
EPP wing cores
Wing beds
Fiberglass spars
Main spar tubes
Balsa stock for elevons
Coroplast winglets
Required for completion:
3M™ Hi-Strength 90 Spray Adhesive, or similar
Paint (optional)
Laminate (available above)
Servos (available above)
Control horns and rods (available above)
Build Notes:
C.G. for the 80" Drak is 3 1/8" (80mm) in front of the fuselage's front main spar cap. This is further forward than the stock Drak with 60" wings.
Let us build your wings for you! Don't have the time, energy, skill or inclination to lay down the wings yourself? Our experienced build techs can glue, spar, paint, laminate and link wings to your specifications.
To order a custom build, please give our shop a call to discuss the particulars: (626) 386-5432. You can also contact us by email at
[email protected]. We look forward to hearing from you!
