Orders shipped Monday-Friday from Arcadia, California.

Cobra C-3520/12 Brushless Motor, Kv=820

Your Price: $57.99
Out of Stock.
Part Number:C-3520/12
Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

The Cobra 3520 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

Included with every Cobra 3520 Series Motor is a complete accessory package which contains the following items:

- Heavy Duty 3mm Thick Cross Style Motor Mount
- Four M3x6mm Motor Mount Screws
- Bolt-On style threaded prop adapter with 3 screws
- Retaining Collar with Set Screw
- Three female 3.5mm bullet connectors
- Three pieces of heat-shrink tubing


Click here for the Cobra C-3520/12 Propeller Data Chart


Cobra 3520/12 Motor Specifications
 Stator Diameter 35.0 mm (1.378 in)
 Stator Thickness 20.0 mm (0.787 in)
 Number of Stator Slots 12
 Number of Magnet Poles 14
 Motor Wind 12 Turn Delta
 Motor Kv Value 820 RPM per Volt
 No Load Current (Io) 1.45 Amps @ 14 Volts
 Motor Resistance (Rm) per Phase 0.039 Ohms
 Motor Resistance (Rm) Phase to Phase 0.026 Ohms
 Maximum Continuous Current 56 Amps
 Max Continuous Power (3-cell Li-Po) 620 Watts
 Max Continuous Power (4-cell Li-Po) 830 Watts
 Max Continuous Power (5-cell Li-Po) 1040 Watts
 Motor Weight 216 grams (7.62 oz.)
 Outside Diameter 43.0 mm (1.693 in.)
 Shaft Diameter 5.00 mm (0.197 in.)
 Motor Body Length 46.0 mm (1.811 in.)
 Overall Shaft Length 68.0 mm (2.677 in.)
 Motor Timing 5-10 degrees
 PWM Frequency 8 KHz


Items Included in Hardware Package




Cobra 35mm Motor Bearing and Mounting Detail



Cobra Motor Packaging



Package Interior


Recently Viewed Items