This is a kit to build two plank-style wings for Ritewing's Nano Drak aircraft. You will combine your original fuselage with these longer replacement wings to create a 45" wingspan Nano Drak. A
Replacement Fuselage can also be used.
These wings are intended for longer flights and more efficient soaring. Alternatively, these wings' greater surface area will allow the Nano Drak to comfortably carry more weight.
Building these wings is similar to building a wire-cut EPP wing. The wing cores come pre-routed with the spar channels already cut and the tube holes already drilled.
Although each plank wing out-spans the molded long wing by only 2.5" (63 mm), they are of considerably greater wing area.
Specifications
Core length of individual wings: 18.5" (470 mm)
Effective wingspan: 45" (1143 mm)
Includes
EPP wing cores
Wing beds
Fiberglass spars
Tubes for main spars
Balsa stock for elevons
Extended vertical stabilizers
Recommended To Complete
Laminate (1-2 yards of 3-mil thickness recommended)
3M™ Hi-Strength 90 Spray Adhesive, or similar
Paint (optional)
