You can now follow up and join the discussion at Rcgroups: http://www.rcgroups.com/forums/showthread.php?t=1767087
The new Skyhunter FPV Plane comes with three high strength carbon fiber tubes (Main wing carbon rod: 12mm x10mm x1200mm x1; Tail carbon rod: 14mm x12mm x800mm x2 ). The main wing is fixed with four high intensity M5 screws (also reserved the rubber band hole, normally not required).
Tail pipe, main wing and horizontal tail are connected by ABS plastic + fast disassembling fixing screw nut.
Huge Space, with wood chips can pull plate layer (layer cell, the upper flight control, receiver and FPV equipment).
Two layer position adjustable height, body side spaces left the cabin door, convenient to put into large scale equipment. Battery position and empennage structure length can be adjusted optionally, convenient for different head weight.
The whole machine is added with a glass rod, carbon and reinforcement treatment, guarantee a maxium take-off weight of 3500 grams.
High strength body and wings
Large equipment and battery space
Fast disassembly components and adjustable tail distance structure
Big weight load and long time flying
Good mobility and stability
Wing string: 240mm
Body length: 650mm
Body width: 160mm
Body high: 150mm
Main wing carbon rod: 12mm x10mm x1200mm x1
Tail carbon rod: 14mm x12mm x800mm x2
Body weight: 900g
Recommend flying weight: 3000g
Max flying weight: 3500g
Recommended power system for this aircraft is:
Motor: 2820 (3542) KV800-950
Servo: 3x 9-15g metal gear
Prop: 11-12? APC “Thin electric” style
Battery: 4S 14.8v 5000-20,000 mah Li-Po