Highlight– Industry best size and weight for similiar range and performance– XT60 connector package– Altimeter, reciever voltage and temperature sensor are all build-in to the telemetry system– Full range Spektrum compatiable telemetry system– Communication protocol is automatically detected for DSMX compatiable or DSM2 compatiable– V/I/mAh sensor provides up to 60A of currenting rating and 30V input maximum– Selectable absolute (accurately measured and clalculated) or sea level (101.325kPa assumed as being the sea-level atmoshperic pressure for mathematic calculation) reading by simply turning the pot. dial to minimum or middle position under the label– Internal temperature sensor automatically selected as primary sensing if external sensor is not connected– mAh counter provides typical of 2.5% accuracy– Telemetry packet missed counter (0 to 100%) for reception estimation displayed on “A” variable in telemetry menu
Quick Reference and understanding the product
– Connect all wireharness to the telemetry system with the appropiate connectors as shown on label.– Connect the ESC in series with the V/I sensor. Do not connect battery or any power source to the unit.– Connect the telemetry system to the receiver bind location.– Ensure Spektrum transmitter telemetry options are selected and enabled properly along with the appropiate measurment system (Imperical / Metric) selected.– Insert bind plug to the telemetry system.– Excute bind procedure by connecting the battery to the V/I sensor for providing power to the unit. Both reciever and telemetry system should flash quickly.– Upon binding, you are now ready to use the telemetry system!
Below is the V/I/mAh sensor. This sensor’s XT60 connector should connect in series between the battery and ESC.