– Crisp, readable display, in any lighting conditions
– Telemetry link to a groundstation, or Smart-Phone App
– Full compatibility with the EzUHF uplink (digital connection)
– Simple to setup, 3 buttons on the OSD itself
– USB port for future upgrades
Simple ‘EZ’ Setup
Who wants to spent hours in front of a PC, or wading through a manual to setup an On Screen Display (OSD).
The EzOSD’s on-screen menu system is integrated, and accessed using three simple buttons. No need to hook up & configure an R/C transmitter/receiver to access the setup menus!
Live Sensor Data
The EzOSD module may be used stand-alone, and will offer navigation, and basic voltage measuring capabilities.
For Gas models, this is generally all that is required for safe FPV flight. The included 100A current sensor records not only the instantaneous current consumption, but also keeps track of the battery level, recording precisely the number of mAh consumed.
Don’t be fooled by cheaper imitations which claim that a current sensor is not required!
All sensor data and the GPS position of the model, is sent down a telemetry link 10x/sec. The EzAntennaTracker displays this, and steers a directional antenna to always point to your model.
The free ‘Immersion Player’ requires a simple audio connection to your PC’s microphone input to show your plane’s position, Live, on a Google-Earth Map.
Safety & Reliability
Its easy to exceed the maximum altitude, or distance, allowed for FPV (or any other flight) in your region.
The EzOSD can be setup to warn you, when selected parameters are exceeded, for example, altitude > 150m.
Support is also provided to comply with Amateur radio callsign broadcast requirements. The EzOSD can automatically broadcast your callsign periodically.
Power Requirements: 2s-6s LiPo (6v – 25v)
Power Consumption: ~100mA