Welcome to our new and improved site! Please Take your time exploring all of our new items.
My Cart (0)
> Cobra CM2204/32 1960kv Multirotor Motor
Cobra CM2204/32 1960kv Multirotor Motor
Put me on the Waiting List
Add to Cart
Cobra Brushless Multirotor Motors offer performance and value for Your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.
The Cobra CM-2204 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature extended pre-tinned motor leads that are 4-1/2 inches (110mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.
The newest version of the CM-2204 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.
Included with every Cobra CM-2204 Series Motor is a complete accessory package which contains the following items:
? Four M3x5mm Motor Mount Screws
? Four M3 Flat Washers
? Machined Aluminum Prop Washer
? Locking Prop Nut with Nylon Insert
Click here for the
Cobra CM-2204/32 Propeller Data Chart
Cobra CM-2204/32 Motor Specifications
22.0 mm (0.866 in)
4.0 mm (0.157 in)
Number of Stator Slots
Number of Magnet Poles
32 Turn Delta
Motor Kv Value
1960 RPM per Volt
No Load Current (Io)
0.58 Amps @ 8 Volts
Motor Resistance (Rm) per Phase
Motor Resistance (Rm) Phase to Phase
Maximum Continuous Current
Max Continuous Power (2-cell Li-Po)
Max Continuous Power (3-cell Li-Po)
24.6 grams (0.87 oz.)
27.0 mm (1.063 in.)
Motor Shaft Diameter
3.00 mm (0.118 in.)
Prop Shaft Diameter
5.00 mm (0.197 in.)
Motor Body Length
14.2 mm (0.559 in.)
Overall Shaft Length
32.5 mm (1.146 in.)
Motor Performance Graphs
The following downloadable PDF files show the performance data curves of the Cobra CM-2204/32 motor, over its entire throttle range, with a variety of propellers. These graphs can be downloaded and printed to use as a reference for calculating power requirements at specific thrust levels, and enable the user to calculate flight times, current draw and other motor parameters.
3-Cell Li-Po Power
Cobra CM-2204/32 Performance Data with APC 6x4 prop on 3S Li-Po
Cobra CM-2204/32 Performance Data with FC 6x4.5 prop on 3S Li-Po
Cobra CM-2204/32 Performance Data with GemFan 6x3 prop on 3S Li-Po
SunnySky X2206 1900KV Brushless Motor
EMAX RS1306 (3300kv) RaceSpec Motor - Cooling Series
EMAX RS1306 (4000kv) RaceSpec Motor - Cooling Series
Out of Stock.
Dys 1407 3600kv Special Edition Motors
SunnySky X2814 1000kv Brushless Motor
SunnySky X2814 900kv Brushless Motor
Out of Stock.
Recently Viewed Items
Browse Similar Items