Welcome to our new and improved site! Please Take your time exploring all of our new items.
My Cart (0)
> Cobra CM-2217/20 Multirotor Motor, Kv=950
Cobra CM-2217/20 Multirotor Motor, Kv=950
Put me on the Waiting List
Add to Cart
Notes from theTeam-Legit Tech Bench:
This motor makes a great 4S endurance-focused power system on smaller flying wings in the 30-45" range. We recommend a 9x6 propeller on 4S.
Cobra Brushless Multirotor Motors offer performance and value for Your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.
The Cobra CM-2217 series motors have a 3.17mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller for reliability, and often need to be cut to length for the specific installation, the CM-2217 motors come without bullet connectors and feature extended pre-tinned motor leads that are 17 inches (430mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.
The CM-2217 series motors include a bolt-on style prop adapter has an M5x0.8mm thread for holding traditional multirotor props that have a 5mm center hole. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.
Included with every Cobra CM-2217 Series Motor is a complete accessory package which contains the following items:
? Four M3x6mm Flat Head Motor Mount Screws
? Three M2x6mm Socket Head Prop Adapter Mounting Screws
? Machined Aluminum Bolt-on Style Prop Adapter
? Machined Aluminum Prop Washer
? Locking Prop Nut with Nylon Insert
NOTE: Cross Mounts are NOT included with any multirotor motors.
Click here for the
Cobra CM-2217/20 Propeller Data Chart
Cobra CM-2217/20 Motor Specifications
22.0 mm (0.866 in)
17.0 mm (0.669 in)
Number of Stator Slots
Number of Magnet Poles
20 Turn Delta
Motor Kv Value
950 RPM per Volt
No Load Current (Io)
0.53 Amps @ 12 Volts
Motor Resistance (Rm) per Phase
Motor Resistance (Rm) Phase to Phase
Maximum Continuous Current
Max Continuous Power (3-cell Li-Po)
Max Continuous Power (4-cell Li-Po)
76 grams (2.68 oz.)
27.7 mm (1.091 in.)
Motor Shaft Diameter
3.17 mm (0.125 in.)
Prop Shaft Diameter
5.00 mm (0.197 in.)
Motor Body Length
33.0 mm (1.299 in.)
Overall Shaft Length
35.1 mm (1.382 in.)
Motor Performance Graphs
The following downloadable PDF files show the performance data curves of the Cobra CM-2217/20 motor, over its entire throttle range, with a variety of propellers. These graphs can be downloaded and printed to use as a reference for calculating power requirements at specific thrust levels, and enable the user to calculate flight times, current draw and other motor parameters.
3-Cell Li-Po Power
Cobra CM-2217/20 Performance Data with APC 12x4.5-MR prop on 3S Li-Po
Cobra CM-2217/20 Performance Data with GemFan 11x4.7-MR prop on 3S Li-Po
Cobra CM-2217/20 Performance Data with GemFan 12x4-MRW prop on 3S Li-Po
4-Cell Li-Po Power
Cobra CM-2217/20 Performance Data with APC 10x4.5-MR prop on 4S Li-Po
Cobra CM-2217/20 Performance Data with GemFan 9x4.7-MR prop on 4S Li-Po
Cobra CM-2217/20 Performance Data with GemFan 11x4-MRW prop on 4S Li-Po
SunnySky X2206 1900KV Brushless Motor
EMAX RS2205 2300kv "Red Bottom" Motor
Talon Multi Wrench for Mini Quads (Rs22 and Mt22 Motors)
Out of Stock.
DYS SE 2205 2550KV 3-5S Racing Edition Brushless Motor
Out of Stock.
iFLY 2205 1900kv Brushless Motor
EMAX LS2206 Lite Spec Brushless Motor
Recently Viewed Items
Browse Similar Items